Filter
Top Products
NANO-PV-D510A User Manual
Page 44
4.4.2 AT/ATX Power Select Jumper Settings
Jumper Label: J_ATXCTL1
Jumper Type:
3-pin header
Jumper Settings:
See
Table 4-2
Jumper Location:
See
Figure 4-3
The AT Power Select jumper specifies the systems power mode as AT or ATX.
Setting Description
Short 2-3 Use AT power
Short 1-2 Use ATX power
Table 4-3: AT/ATX Power Select Jumper Settings
Figure 4-4: AT/ATX Power Select Jumper Settings
4.4.3 Clear CMOS Jumper
Jumper Label: J_CMOS1
Jumper Type:
3-pin header
Jumper Settings:
See
Table 4-4
Jumper Location:
See
Figure 4-5
To reset the BIOS, move the jumper to the "Clear BIOS" position for 3 seconds or more,
then move back to the default position.
Setting Description
1-2 Keep current BIOS setup
2-3 Clear BIOS
Table 4-4: Clear BIOS Jumper Settings