Filter
Top Products
NANO-PV-D510A User Manual
Page 17
3.2.3 Battery Connector
CN Label: BAT1
CN Type:
2-pin wafer (1x2)
CN Location:
See
Figure 3-5
CN Pinouts:
See
Table 3-5
This is connected to the system battery. The battery provides power to the system clock to
retain the time when power is turned off.
Figure 3-5: Battery Connector Location
Pin Description
1 Battery+
2 Ground
Table 3-5: Battery Connector Pinouts
3.2.4 CompactFlash® Slot
CN Label: CF1
CN Type:
CompactFlash® card slot
CN Location:
See
Figure 3-6
CN Pinouts:
See
Table 3-6
A CompactFlash® Type I/II card can be used in this slot.