Filter
Top Products
NANO-PV-D510A User Manual
Page 56
Figure 4-16: LAN Connection
Step 3: Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN
cable RJ-45 connector into the onboard RJ-45 connector. Step 0:
4.7.2 PS/2 Y-Cable Connection
The NANO-PV-D510A has a PS/2 connector on the external peripheral interface panel.
The dual PS/2 connector is connected to the PS/2 Y-cable that came with the
NANO-PV-D510A. One of the PS/2 cables is connected to a keyboard and the other to a
mouse to the system. Follow the steps below to connect a keyboard and mouse to the
NANO-PV-D510A.
Step 1: Locate the dual PS/2 connector. The location of the PS/2 connector is shown
in Chapter 3.
Step 2: Insert the keyboard/mouse connector. Insert the PS/2 connector on the end
of the PS/2 y-cable into the external PS/2 connector. See
Figure 4-17.