Filter
Top Products
User’s Guide
Using the Console Interface
31
Figure 6-9. Deleting a User
4.
Choose SAVE and press Enter to let the user addition take effect.
5.
Choose EXIT to leave the Delete Users menu.
Setting up the Switch
This section describes the settings you will need to change to allow you to be
able to manage the switch from an SNMP-based Network Management
System such as D-Link’s D-View, or to be able to access the switch using the
Telnet
protocol.
TCP/IP Settings
The switch needs to have a TCP/IP address assigned to it so that the network
management system or
Telnet
client can find it on the network. The
TCP/IP Parameters Configuration Menu allows you to change the settings for
the two different interfaces used on the switch: the Ethernet interface used for