Filter
Top Products
User’s Guide
Using the Console Interface
45
The Spanning Tree Protocol puts all root ports and designated ports in the
forwarding state, while placing the others in the blocking state.
LAN 1
LAN 2
LAN 3
Switch 1
Switch 2
Switch 3
Bridge ID = 21
Bridge ID = 30
Bridge ID = 15
12
12
12
Setting Spanning Tree Protocol
Parameters
To set the STP bridge parameters for the switch,
1.
Choose Spanning Tree Algorithm Parameters from the main menu.
2.
Choose Protocol Parameters from the Spanning Tree Algorithm
Parameters menu.
3.
The Protocol Parameters menu displays the current status of the
Spanning Tree Algorithm’s operation on the DES-2212, and allows
you to change several of the bridge parameters. All of these settings
are described below.