Filter
Top Products
Boot Configuration File
67
Enables or disables authentication failure traps for invalid SNMP
community names. The argument may be
enable
or
disable
.
♦
clear-SNMP-comm-table
Clears the hub’s SNMP community name table.
♦
SNMP-community
community permissions
Adds community to the switch’s list of SNMP communities, with access
permissions. The community name can be up to 32 characters long.
Permissions can be
read
, for read-only community access, or
write
,
for read-write community access.
♦
clear-ip-trap-manager-table
Removes all entries from the switch’s trap manager list.
♦
ip-trap-manager
address community
Adds the host at address to the switch SNMP trap manager list. Traps
sent to the host will use community name community, which may be a
string up to 32 characters long.
♦
PFT-Entry
mac-address recv-port allowed-ports
Adds entries to the switch’s forwarding table. The mac-address
corresponds to the source Ethernet address, in the form xx:xx:xx:xx:xx:xx.
The recv-port is the port from which packets from the station may be
received. The allowed-ports field lists the ports to which packets from the
station may be forwarded, separated by slashes.