Filter
Top Products
User’s Guide
Using the Console Interface
51
Figure 6-21. Statistics Counters
You can use the PREPORT, and NEXTPORT commands to switch ports.
The CLEAR COUNTER command will start all of the counters over at 0.
Resetting the Switch
You can use the console interface to reset the switch, either doing a System
Reset (which restarts the switch and is identical to powering the hub off and
back on again) or a Factory Reset (which sets all of the switch’s parameters to
what they were when the switch was delivered from the factory).
System Reset
To perform a system reset,
1.
Choose System Reset from the main menu.