Filter
Top Products
10/100 Fast Ethernet Switch User’s Guide
6
Unpacking and Setup
Setup
Consider the following when setting up the Switch:
♦
The power outlet should be within 1.82 meters of the device.
♦
Visually inspect the power cord and see that it is fully secured to the
AC power connector.
♦
Make sure that there is proper heat dissipation from and adequate
ventilation around the Switch. Do not place heavy objects on the
Switch.
Rack Installation
The Switch can be mounted in an EIA standard size, 19-inch rack, which can
be placed in a wiring closet with other equipment. To install, attach the
mounting brackets on the switch’s front panel (one on each side) and secure
them with the screws provided.
Figure 1A, Attaching the mounting brackets to the Switch
Then, use the screws provided with the equipment rack to mount the Switch
in the rack.