Filter
Top Products
C
O
PTIONAL
100BASE-FX M
ODULE
The 100BASE-FX specification requires the fiberoptic cabling which is more
expensive than the conventional UTP cabling. However, it has a definite
appeal to widespread LANs where cost of wiring is less important than the
distance it delivers to Ethernet LANs-400 meters for half-duplex segments
and 2 kilometers for full-duplex segments.
The 100BASE-FX port requires one pair of 62.5/125 micron fiber-optic
cable. It services distance of up to 400 meters and supports full or half-
duplex operation. It is an ideal solution for backbone connections.
How to Install the DES-112FX 100BASE-FX
module
♦ Unplug power code.
♦ Unscrew and remove the cover slot from the real panel of the DES-1012.
♦ Slide-in and securely screw the 100BASE-FX module into the open slot
of the DES-1012.
♦ Attach the Fiber Optic cable to the 100BASE-FX module.
Offices