D-Link DES-1012 Switch User Manual


 
10/100 Fast Ethernet Switch User’s Guide
Connecting the Switch
21
useful:
Figure 10, The Console Program Screen Map
The following example illustrates how to disable or enable the AN function for
Port 1:
1. Press
P
from the Main Menu to access the Port Submenu.
2. Press
A
in the port submenu to access the set AN function
ENABLE/DISABLE screen.
3. Press
01
to access Port 1.
4. Press
0
to disable the AN function or press
1
to enable the AN function.
5. Press <Esc> or <Enter> to go back to the main menu.
Configuring the Console
The options available from the Main Menu are:
S : goto system submenu
P : goto port submenu
C : get port counter
System Submenu
With the System Submenu, you can perform the following:
V:
Display the Hardware and Firmware version numbers
. This is a view-
only screen showing the hardware and software version of the switch.
Figure 11, Version Number Screen