Filter
Top Products
10/100 Fast Ethernet Switch User’s Guide
Connecting the Switch
15
♦
Link/Act indicator is
ON
.
♦
FDX/Col indicator is OFF.
100Base-TX Hub
For a 100Base-TX hub, the Switch LED indicators should illuminate as
follows:
♦
100M LED speed indicator is
ON.
♦
Link/Act is
ON
.
♦
FDX/Col LED indicator is OFF.
Hub Without Uplink (MDI-II) Port
If a hub is not equipped with an uplink (MDI-II) port, then a connection can
be made using either a straight cable or a crossover cable (see
Appendix A
,
Technical Specifications
for cable requirements).
Figure 7, The Switch connected to a Hub without an uplink (MDI-
II) port using the Straight or crossover cable option