Filter
Top Products
14
Using the Configuration Utility (continued)
Home > Mode > Central Dynamic IP Router
Select Central Dynamic IP Router if you are locating the router in a central
position to obtain an IP Address automatically from your ISP or corresponding
wireless network. Most Cable Modem Users will select this option.
You may enter the Host Name here (optional)
Host Name-
Select Disable or Enable. NAPT is a form of NAT; it provides
a type of firewall by hiding internal IP Addresses and it works
as an inbound virtual server, with IP based access control
NAPT-
Enter the wireless IP Address of the DWL-1750. The default
IP Address is 192.168.1.50
IP Address-
Enter the subnet mask. All devices on your network should
have the same subnet mask
Subnet Mask-
Click Apply if you have made any changes
Apply-
WAN - Ethernet
LAN - Wireless