Filter
Top Products
12
DI-LB604 User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Home > WAN
WAN
Dynamic IP:
Select this if you want the WAN port to get its IP address from
a DHCP server.
PPPoE:
Select this if you want the WAN port to get its IP address from
a PPPoE server.
Connection Mode:
There are three connection modes for each WAN port, Enable,
Disable and Backup. Set to Disable if there is no modem connected
to the WAN port. If both WAN ports are used, one is set to Enable
and the other is set to Backup, the backup line will automatically
be used when the other line is disconnected.
Static IP:
Select this if you want to specify a fixed IP address for the WAN
port.
PPTP Connection:
To enable or disable PPTP connection on the WAN port.
Backup of:
To indicate which WAN port to be the backup of current port.
Connection