Filter
Top Products
22
DI-LB604 User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Static Routing
Advanced > Static Routing
Static Routing:
If there is more than one router on a network, this Routing table
must be configured because the router needs to know what packet
goes to which router. A routing table entry is required for each LAN
segment on the network.
Static Routing
Network Address:
Network Address is the address of the destination network
segment.
Netmask:
The subnet mask used to select the bits from an IP Address that
corresponds to the subnet.
Gateway:
The IP router that the packets destined to the Network Address will
be forwarded to.
Interface:
The device’s port that the packets destined to the Network Address
will be passed through.
Metric:
The number of routers that must be traversed to reach the destination
network segment.