Filter
Top Products
40
DI-LB604 User’s Manual
D-Link Systems, Inc.
Using the Configuration Menu
Packet Types:
The types of the ICMP packets that could be blocked.
System Restart:
The link to the page to restart system.
System Restart
DNS Loopback
DNS Loopback:
If there is any domain in your private network. You can setup the
mapping table of Domain Name & Private IP for DNS query.
Interface Binding
SMTP Binding:
To determine if the SMTP packets are bound on the WAN port.
SMTP Binding
Port:
To specify the WAN port that your SMTP traffic is only transmitted
on. It could be that you have two accounts from two different ISP.
It is best to use only one.
Set Protocol & Port Binding
Set Protocol & Port
Binding:
To determine if the SMTP packets are bound on the WAN port.
Protocol & Port Binding
Protocol & Port
Binding:
It is very like SMTP binding, but you must setup extra data like
Protocol & Port Range. If all the checking items are met, the packet
will be bound on the specified WAN port.
Enable:
To activate or deactivate current rule.
Source IP:
The IP address that the packet’s source IP will be checked
against.
Dest. IP / IP
Address:
The specific IP range that the packet’s destination IP will be checked
against. There are two forms of Dest. IP: If Subnet is selected, the
fields IP Address and Subnet Mask need to be filled. If IP Range
is selected, the fields From and To need to be filled.
Protocol:
The protocol that the packet’s protocol will be checked against.
Port Range:
The specific port number range that the packet’s destination port
number will be checked against.
WAN:
The specific WAN port that the packet will be bound on if all the
checking items are met.
Back:
The link to the main page of Advanced Feature.
Back
IP Sec/PPTP:
Enable this to allow UPN connections from PCs on the LAN to
senders.