Filter
Top Products
6D-Link DWR-116 User Manual
Section 2 - Installation
Installation
This section will guide you through the installation process. Placement of the router is very important. Do not place the router
in an enclosed area such as a closet or cabinet, or in an attic or garage.
Connect to Your Network
Note: Ensure that your DWR-116 Wireless N300 Multi-WAN Router is disconnected and powered off before performing the
installation steps below.
1. Connect a USB modem to the USB port located on the top of the router.
2. Insert an Ethernet network cable into the LAN port on the back of the router. Plug the other end of the Ethernet cable into
the LAN port of your computer or laptop. The Ethernet LED will turn green if the Ethernet connection is successfully established.
Note: The DWR-116 Wireless N300 Multi-WAN Router’s LAN ports are “Auto-MDI/MDIX.” Therefore, patch or crossover Ethernet
cables can be used.
3. Configure the device using the setup utility.