![](http://pdfasset.owneriq.net/2/8f/28fc6672-fb0f-469d-acc9-13ef0d3cefdb/28fc6672-fb0f-469d-acc9-13ef0d3cefdb-bg2d.png)
41D-Link DWR-116 User Manual
Section 3 - Conguration
Select this box to Enable the lter.
You may select Always On or choose the
number of a schedule rule that you have
dened.
Copies the predened lter to the specied ID
Identies the lter.
Specify the local IP address
Specify the local port after the colon.
Specify the remote IP address
Specify the remote port after the colon.
Select this box to enable the lter.
Specify the schedule rule number.
Go back to the previous lter page.
Advance to the next lter page.
Click Save Settings to save your changes,
or click Don’t Save Settings to discard your
changes.
Inbound Filter
Inbound Filter:
Use Schedule
Rule:
Copy to ID:
ID:
Source IP :
Source Ports:
Destination IP :
Destination Ports:
Enable:
Schedule Rule #:
Previous Page:
Next Page:
Inbound Filter enables you to control what packets are allowed
to pass through the router. Inbound filter only applies to packets
that are destined for Virtual Servers or DMZ hosts.