D-Link DWR-116 Network Router User Manual


 
46D-Link DWR-116 User Manual
Section 3 - Conguration
Enter a password that the admin account
will use to access the router’s management
interface.
Conrm the chosen password.
Remote management allows the DWR-116
to be congured from the Internet using a
web browser. A username and password is
still required to access the web-management
interface. Usually only a member of your
network can browse the built-in web pages to perform Administrator tasks. This feature enables you to perform Administrator
tasks from the remote (Internet) host.
Enter the Internet IP address of the PC that has access to the broadband router. If you enter an asterisk (*) in this eld, then anyone
will be able to access the router. Adding an asterisk (*) into this eld could present a security risk and is not recommended.
This is the port number used to access the router. Example: 8080 is the port used for the web-management interface.
Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes.
Tools
Admin
The Admin page allows you to change the Administrator
password and enable Remote Management. The Administrator
has read/write access while the user has read-only access. Only
the admin has the ability to change both admin and user account
passwords.
New Password:
Confirm Password:
Remote
Management:
IP Allowed to
Access:
Port: