Filter
Top Products
18D-Link DWR-116 User Manual
Section 3 - Conguration
PPPoE
Choose this Internet connection if your ISP provides you with a
PPPoE account.
The username/account name that your ISP
provides to you for PPPoE dial-up.
Password that your ISP provides to you for
PPPoE dial-up.
Fill in with the same password in Password eld.
(Optional) Fill in if provided by your ISP.
(Optional) Fill in if provided by your ISP. If not, keep the default value.
(Optional) Fill in if provided by your ISP. If not, keep the default value.
(Optional) Fill in if provided by your ISP. If not, keep the default value.
MAC address of WAN interface. You can also copy MAC address of your PC to its WAN interface by pressing the Clone button.
The Restore MAC button will reset the router to its default MAC address.
The amount of time of inactivity before disconnecting established PPPoE session. Setting it to zero or enabling Reconnect
Mode: Always-on setting will disable this feature.
You may need to change the Maximum Transmission Unit (MTU) for optimal performance. The default setting of PPPoE is 1492.
The device will dial-up PPPoE connection automatically.
Click Save Settings to save your changes, or click Don’t Save Settings to discard your changes.
Username:
Password:
Verify Password:
Service Name:
IP Address:
Primary DNS Server:
Secondary DNS
Server:
MAC Address:
Maximum Idle Time:
Maximum
Transmission Unit
(MTU):
Auto-reconnect: