Filter
Top Products
34D-Link DWR-116 User Manual
Section 3 - Conguration
Select this box to enable the DHCP server on
your router.
Enter the starting and ending IP address for
the server’s IP address pool.
The time period for the IP address lease. Enter
the lease time in minutes.
Assign a primary DNS Server to DHCP clients.
Assign a DNS Server to DHCP clients.
Assign a primary WINS Server to DHCP clients.
Assign a WINS Server to DHCP clients.
Click Save Settings to save your changes,
or click Don’t Save Settings to discard your
changes.
Enable DHCP
Server:
DHCP IP
Address Range:
DHCP Lease
Time:
Primary DNS IP
Address:
Secondary DNS
IP Address:
Primary WINS IP
Address:
Secondary WINS
IP Address:
DHCP Server Settings
The DWR-116 has a built-in DHCP (Dynamic Host Control Protocol)
server. The DHCP server assigns IP addresses to devices on
the network that request them. By default, the DHCP Server is
enabled on the device. The DHCP address pool contains a range
of IP addresses, which are automatically assigned to the clients
on the network.