Filter
Top Products
Vigor2800 Series User’s Guide
120
3
3
.
.
1
1
0
0
.
.
5
5
C
C
a
a
l
l
l
l
C
C
o
o
n
n
t
t
r
r
o
o
l
l
Some applications require that the router (only for i models) be remotely activated, or be
able to dial up to the ISP via the ISDN interface. Vigor routers provide this feature which
allows you to make a phone call to the router and then ask it to dial up to the ISP.
Note: Call Control is only available for i models equipped with the ISDN
interface.
Please set Dialing to a Single ISP first before configuring this web page.
Dial Retry It specifies the dial retry counts per triggered packet. A
triggered packet is the packet whose destination is outside the
local network. The default setting is no dial retry. If set to 5,
for each triggered packet, the router will dial 5 times until it is
connected to the ISP or remote access router.
Dial Delay Interval It specifies the interval between dialup retries. By default, the
interval is 0 second.
Remote Activation It specifies a phone number in the Remote Activation field to
enable the remote activation function. If the router accepts a
call from the number 12345678, it will terminate the incoming
call immediately and dial to the ISP.
Link Type Because ISDN has two B channels (64Kbps/per channel), you
can specify whether you would like to have single B channel,
two B channels or BOD (Bandwidth on Demand). Four
options are available: Link Disable, Dialup 64Kbps, Dialup
128Kbps, Dialup BOD.
PPP Authentication It specifies the PPP authentication method for PPP/MP
connections. Normally you can set it to PAP/CHAP for better
compatibility.