Filter
Top Products
Vigor2800 Series User’s Guide
47
To edit or add a filter, click on the set number to edit the individual set. The following page
will be shown. Each filter set contains up to 7 rules. Click on the rule number button to edit
each rule. Check Active to enable the rule.
Filter Rule Click a button numbered (1 ~ 7) to edit the filter rule. Click the
button will open Edit Filter Rule web page. For the detailed
information, refer to the following page.
Active Enable or disable the filter rule.
Comment Enter filter set comments/description. Maximum length is
23–character long
Next Filter Set Set the link to the next filter set to be executed after the current
filter run. Do not make a loop with many filter sets.
To edit Filter Rule, click the Filter Rule index button to enter the Filter Rule setup page.
Comments Enter filter set comments/description. Maximum length is 14-
character long.
Check to enable the
Filter Rule
Check this box to enable the filter rule.
Pass or Block Specifies the action to be taken when packets match the rule.
Block Immediately - Packets matching the rule will be dropped