Filter
Top Products
Vigor2800 Series User’s Guide
22
Below shows the menu items for Internet Access.
3
3
.
.
1
1
.
.
2
2
P
P
P
P
P
P
o
o
E
E
/
/
P
P
P
P
P
P
o
o
A
A
PPPoA, included in RFC1483, can be operated in either Logical Link Control-Subnetwork
(LLC) Access Protocol or VC-Mux mode. As a CPE device, Vigor router encapsulates the
PPP session based for transport across the ADSL loop and your ISP’s Digital Subscriber
Line Access Multiplexer (SDLAM).
To choose PPPoE or PPPoA as the accessing protocol of the internet, please select
PPPoE/PPPoA from the Internet Access menu. The following web page will be shown.
PPPoE/PPPoA Client Click Enable for activating this function. If you click Disable, this
function will be closed and all the settings that you adjusted in this
page will be invalid.
DSL Modem Settings Set up the DSL parameters required by your ISP. These are vital
for building DSL connection to your ISP.
Multi-PVC channel – The selections displayed here are
determined by the page of Internet Access – Multi PVCs. Select
M-PVCs Channel means no selection will be chosen.
VPI - Type in the value provided by ISP.
VCI - Type in the value provided by ISP.
Encapsulating Type - Drop down the list to choose the type
provided by ISP.