Filter
Top Products
Vigor2910 Series User’s Guide
53
range from defined groups or objects, please choose Group and
Objects as the Address Type.
From the IP Group drop down list, choose the one that you want
to apply. Or use the IP Object drop down list to choose the object
that you want.
Service Type Click Edit to access into the following dialog to choose a suitable
service type.
To set the service type manually, please choose User defined as
the Service Type and type them in this dialog. In addition, if you
want to use the service type from defined groups or objects, please
choose Group and Objects as the Service Type.
Protocol - Specify the protocol(s) which this filter rule will apply to.
Source/Destination Port -
(=) – when the first and last value are the same, it indicates one
port; when the first and last values are different, it indicates a range
for the port and available for this service type.
(!=) – when the first and last value are the same,
it indicates all
the ports except the port defined here; when the first and last
values are different, it indicates that all the ports except the range
defined here are available for this service type.
(>) – the port number greater than this value is available.
(<) – the port number less than this value is available for this
profile.
Service Group/Object - Use the drop down list to choose the one
that you want.