Filter
Top Products
3-2 ON-SCREEN DISPLAY MENUS
3-2-1 HOW TO OPERATE
1. To Open the ON-Screen Display (OSD) menu, press the "Menu" button on the
Remote Control or Control Panel .
2. When the OSD is displayed, use "Cursor" buttons on the Control Panel or on the
Remote Control to choose the item you need.
3. Press the "Menu" button again to exit.
3-2-2 PROJECTOR'S OSD
IMAGE
DISPLAY
AUDIO
SYSTEM
LANGUAGE
TV
COMPUTER IMAGE
Brightness
Contrast
Frequency
Tracking
Hor. Position
Ver. Position
Image Mode
VIDEO IMAGE
Brightness
Contrast
Color Satur.
Sharpness
Tint
Image Mode
DISPLAY
Aspect Ratio
Zoom
Keystone
Color Temperature
AUDIO
Volume
Treble
Bass
Mute
Int/Ext Speaker
Wireless Channel set
SYSTEM
OSD Location
Projection
Lamp Hours
Lamp Reset
Int/Ext Speaker
Auto Source
Factory Reset
LANGUAGE
English
Deutsch
Francais
Espanol
TV
Auto Search Channel
Add/Del Channel
Fine Tune
Volume Mode
TV System
High Brightness
Gamma
High Brightness
Gamma
NTSC sys. setting
PAL sys. setting
Red Color
Temperature
Green Color
Temperature
Blue Color
Temperature
Wireless Channel
setting
Control Panel and Remote Control
3-2-2-1 MAIN MENU
DRAWING 34
Press the “Enter" button to enter the submenu,
press it again to return to the main menu.
Main Menu includes:
Image
Display
Audio
System
Language
TV
3-2-2-2 IMAGE
Computer Image
Brightness: Adjusts the brightness of the
image.
Contrast: Adjusts the contrast of the image
Frequency: Adjusts the frequency to match
the frequency of your computer's graphic
card.
Tracking: Synchronizes the signal timing with
your computer's graphic card.
Hor. Position: Moves the image's horizontal
position.
Ver. Position: Moves the image's vertical
position.
Image Mode: Choose a mode
Computer: This mode is good for computer
signals.
Standard: This mode is good for movie
pictures.
User: This mode allows you to adjust High
Brightness and/or Gamma. Press the "Right"
button to enter the submenu.
High Brightness: Sets the white peaking level
of the DMD chip. If you prefer a stronger
image, press the "Right" button to increase
the value. If you want a more natural image,
press the" Left" button to decrease the value.
Gamma: Adjusts the Gamma (mid-tone
brightness) curve.
DRAWING 35
DRAWING 36
Control Panel and Remote Control