Filter
Top Products
2
ATCA-7350 Control via IPMI Programmer’s Reference (6806800H29E)
15
Supported Commands
2.1 Standard IPMI Commands
The IPMC is fully compliant to the Intelligent Platform Management Interface v.1.5. This section
provides information about the supported IPMI commands.
2.1.1 Global IPMI Commands
The IPMC supports the following global IPMI commands.
2.1.2 System Interface Commands
The system interface commands are supported by blades providing a system interface.
Table 2-1 Supported Global IPMI Commands
Command NetFn (Request/Response) CMD Comments
Get Device ID 0x06/0x07 0x01 -
Cold Reset 0x06/0x07 0x02 -
Warm Reset 0x06/0x07 0x03 -
Get Self Test Results 0x06/0x07 0x04 -
Get Device GUID 0x06/0x07 0x08 -
Table 2-2 Supported System Interface Commands
Command NetFn (Request/Response) CMD
Set BMC Global Enables 0x06/0x07 0x2E
Get BMC Global Enables 0x06/0x07 0x2F
Clear Message Flags 0x06/0x07 0x30
Get Message Flags 0x06/0x07 0x31
Get Message 0x06/0x07 0x33
Send Message 0x06/0x07 0x34
Set Channel Access 0x06/0x07 0x40
Get Channel Access 0x06/0x07 0x41
Get Channel Info 0x06/0x07 0x42
Set User Access 0x06/0x07 0x43
Get User Access 0x06/0x07 0x44
Set User Name 0x06/0x07 0x45