Filter
Top Products
Chassis Device Commands Supported Commands
ATCA-7350 Control via IPMI Programmer’s Reference (6806800H29E)
19
2.1.7.1.1 System Boot Options Parameter #5
This boot parameter is implemented as specified within the IPMI specification, but not all flags
are supported.
Table 2-9 System Boot Options Parameter #5
Data Byte Description
1 [7] - 1b = boot flags valid. The bit should be set to indicate that valid flag data is
present. This bit may be automatically cleared based on the boot flag valid bit
clearing parameter, above.
[6] - Not supported.
[5] - Not supported
[4:0] - reserved
2 [7] - 1b = CMOS clear
[6] - Not supported
[5:2] - Boot device selector
0000b = No override
0001b = Force PXE
0010b = Force boot from default Hard-drive
0011b = Not supported
0100b = Not supported
0101b = Force boot from default CD/DVD
0110b = Not supported
0111b-1110b = Reserved
1111b = Force boot from Floppy/primary removable media
[1] - 1b = Not supported
[0] - 1b = Not supported
3 Not supported
4 Not supported
5 Reserved