Filter
Top Products
ATCA-7350 Control via IPMI Programmer’s Reference (6806800H29E)
Supported Commands PICMG 3.0 Commands
22
2.2 PICMG 3.0 Commands
The Emerson IPMC is a fully compliant AdvancedTCA intelligent Platform Management
Controller i.e. it supports all required and mandatory AdvancedTCA commands as defined in
the PICMG 3.0 specifications.
Table 2-14 Supported PICMG 3.0 Commands
Command
NetFn
(Request/Response) CMD Comments
Get PICMG Properties 0x2C/0x2D 0x00 -
Get Address Info 0x2C/0x2D 0x01 -
FRU Control 0x2C/0x2D 0x04 -
Get FRU LED Properties 0x2C/0x2D 0x05 -
Get FRU LED Color Capabilities 0x2C/0x2D 0x06 -
Set FRU LED State 0x2C/0x2D 0x07 -
Get FRU LED State 0x2C/0x2D 0x08 -
Set IPMB State 0x2C/0x2D 0x09 -
Set FRU Activation Policy 0x2C/0x2D 0x0A -
Get FRU Activation Policy 0x2C/0x2D 0x0B -
Set FRU Activation 0x2C/0x2D 0x0C -
Get Device Locator Record ID 0x2C/0x2D 0x0D -
Set Port State 0x2C/0x2D 0x0E -
Get Port State 0x2C/0x2D 0x0F -
Compute Power Properties 0x2C/0x2D 0x10 -
Set Power Level 0x2C/0x2D 0x11 -
Get Power Level 0x2C/0x2D 0x12 -
Get IPMB Link Info 0x2C/0x2D 0x18 -
Set AMC Port State 0x2C/0x2D 0x19 -
Get AMC Port State 0x2C/0x2D 0x1A -
Get FRU Control Capabilities 0x2C/0x2D 0x1E -
Get target upgrade capabilities 0x2C/0x2D 0x2E -
Get component properties 0x2C/0x2D 0x2F -
Abort firmware upgrade 0x2C/0x2D 0x30 -
Initiate upgrade action 0x2C/0x2D 0x31 -
Upload firmware block 0x2C/0x2D 0x32 -
Finish firmware upload 0x2C/0x2D 0x33 -
Get upgrade status 0x2C/0x2D 0x34 -