Emulex NP02 Printer User Manual


 
Windows NT 9-1
Requirements
Before beginning, make sure the network conforms to these requirements:
Version 3.5 of Windows NT is the minimum version required to install
the Emulex printer server as described in this manual. Customers with
earlier versions of Windows NT do not have LPR/LPD.
See Tech Note TN_50.TXT on the Emulex BBS for information on how
to run the printer server with Windows NT 3.1.
Before Installation
We recommend writing down the following parameters from the Setup
Section in Chapter 2. Refer to them during the installation procedure.
Default Server Name: ____ ____ ____ ____ ____ ____ ____ ____ ____
Default Printer Name: ___ ___ ___ ___ ___ ___ ___ ___ ___ _ ___
IP Address: ___ ___ ___-___ ___ ___ -___ ___ ___-___ ___ ___
Subnet Mask: ___ ___ ___-___ ___ ___ -___ ___ ___-___ ___ ___
TCP port _______ (parallel port) TCP port _______ (parallel port)
TCP port _______ (serial port) TCP port _______ (serial port)
Telnet port number _______ RCF port number _______