Emulex NP02 Printer User Manual


 
2-14 Chapter 2
To determine the default printer name, enter the Emulex default printer server
name combined with the Emulex printer server port number. Port numbering
on the NETQue Pro2 is as follows:
#1 - Upper parallel port
#2 - Lower parallel port
#3 - Serial port
For example, NP201A06A_3 is the NETQue Pro2 serial port.
Default Printer Name: NP2 ____ ____ ____ ____ ____ ____ _ ____
LAN Connections & Cabling
The printer server may be connected to the network with one of these cables.
Unshielded twisted-pair (UTP) with an RJ-45 connector
Thinwire with a BNC connector and BNC T-adapter
CAUTION: Do not connect network cables to both the BNC
and the UTP ports on the printer server at the
same time.
Unshielded Twisted-Pair Connection
1) Connect one end of the UTP cable to the printer server UTP port.
See Appendix for UTP pinout details.
2) Connect the other end of the UTP cable to the entwork.
3) Do not connect anything to the printer server BNC port.
MAC ADDRESS
00-00-C9-01-A0-6A
POWER
UTPBNC
Figure 2-8: Printer Server LAN Connections