Filter
Top Products
Protocol VLAN Configuration Screen
VLAN Configuration 3-25
Field Definitions
Table 3-6 Protocol VLAN Configuration Screen Field Definitions
Use this field … To …
VLAN ID - upper
part of screen
(Selectable)
Display the VLAN IDs currently configured and may be selected
after the screen is saved to call up the Protocol Ports Configuration
screen using the ENTER key.
Protocol Type - upper
part of screen
(Selectable)
Display the protocol type associated with the VLAN ID in the VLAN
ID column. This field may be selected after the screen is saved to call
up the Protocol Ports Configuration screen.
Configured Ports
(Selectable)
Indicate if a VLAN ID and Protocol Type applies to all configurable
ports or only those listed in the Protocol Ports Configuration screen
for that Priority and Protocol Type. Configurable ports are all the
physical ports and existing virtual interfaces (such as for ATM).
VLAN ID
(Modifiable)
Enter the VLAN ID which will be assigned to a protocol. The VLAN
ID may be one already created or a new one. If a new VLAN ID is
entered, it will be added to the VLAN Configuration with a FID of the
same value as the VLAN ID and a VLAN name of PROTOCOL
VLAN. To enter the VLAN IDs, refer to Section 3.8.2.
Configure Ports
(Toggle)
Apply the priority and protocol type to all or none of the configurable
ports. The choices are:
ALL PORTS
NO PORTS
NOTE: If ports are added or removed from the port list in the Priority
Ports Configuration screen described in Section 3.9, the Configured
Ports for the particular VLAN ID and Protocol Type will change from
ALL PORTS or NO PORTS to USER DEFINED PORT LIST in the
Protocol Priority Configuration screen.