Filter
Top Products
Enhancements to LCM Commands
2-9
2.5.4 Switch Command
The SmartSTACK Ethernet ELS10-27TX supports two forms of Virtual LANs.
One is the IEEE 802.1Q standard (spanning tree) and the other is Workgroups.
The switch command allows you to select the mode in which the SmartSTACK
Ethernet ELS10-27TX operates.
switch [802.1D| 802.1Q]
[cut[-through] | store[-and-forward]]
[back[pressure] {on | off}]
The command by itself displays the following:
ELS10-27>switch
The present switch mode is: 802.1d
The switch mode upon the next reboot will be: 802.1d
The forwarding mode in use is: Store and Forward
Backpressure is off
NOTE
Prior to changing to 802.1Q mode, all Workgroups must
be deleted. When in 802.1Q mode, do not configure any
workgroups.