Enterasys Networks ELS10-27TX Switch User Manual


 
5-2
Configuring Workgroups Using LCM
5.2 WORKGROUP CONFIGURATION EXAMPLES
Figure 5-1 shows an example of a typical Workgroup configuration. In this
example, two Workgroups are used: Workgroup Alpha and the Default
Workgroup. Workgroup Alpha contains ports 3,5,7 and 9, and the Default
Workgroup contains all ports not contained in Workgroup Alpha.
Figure 5-1. Traffic Within Workgroups
In this example, all broadcast, multicast, and unicast packets will be restricted to
the Workgroups.
2. If Workgroups were not defined, all ports are members of the
1. The system creates the Default Workgroup.
Default Workgroup.
NOTES
Workgroup Alpha
Workgroup Default
Ports 3, 5, 7, 9
Ports 1, 2, 4, 6, 8, and 10 - 27