Filter
Top Products
3-6
Configuring VLANs Using SNMP
3.4 THE FILTER GVRP TABLE
The Filter GVRP Table can be used to inhibit VLANs from being learned via
GVRP. It can also be used to inhibit a user from accidentally configuring a port
on a VLAN they do not want.
In the other tables, there are several local variables associated with the Filter
GVRP Table, such as index, the VLAN ID, the list of ports, the status, and
establish.
In the other tables, valid entries are between 0 and 31. An index outside of this
range allows read/write access to the local variables.
3.4.1 Modifying, Creating or Deleting a Filter GVRP Table
Entry
To modify, create, or delete an entry in the Filter GVRP Table, proceed as
follows:
When a write to the status entry has completed, an attempt will be made to carry
out the command.
Step Action
1 Set the index outside its valid range.
2 Set the VLAN ID to the value desired.
3 Set the port variable to the value desired.
4 Set the establish variable to Create or Delete.
5 Set the index to the table entry you desire to modify.
6 Write any value to the status variable.