Filter
Top Products
You
can also request help information for more than one
command. Follow these steps:
1.
At the command prompt, type
HELP
followed by the
names of the commands you want information about. Then
press
Enter.
Separate each command name with a space.
For example, to see help information for the DISKCOPY,
FORMAT, and COPY commands, type the following and
press
Enter:
HELP DISKCOPY FORMAT COPY
2.
The help information for the first command is displayed
first. If there is more than one page of information about
the command, you see the prompt PgUp at the top of the
screen. Press
PgUp
to see more.
3.
Press
ESC
to see the help information for the next
command.
4.
To exit the HELP program, press
E
SC
after viewing the
information for the last command.
Using MENU
The MENU program lets you display a menu of MS-DOS
commands and select the one you need. MENU is easy to use
because you can execute commands without having to
remember the exact syntax for each command.
Follow these steps to access the MENU program:
1.
Log onto drive C (if you have a hard disk) or insert the
Operating 2 diskette into drive A and log onto that drive.
3-36
Using MS-DOS With Your Computer