Filter
Top Products
22 Displaying and Adjusting the Image
Adjusting the Image
Once you see your image, you need to make certain adjustments:
■ If the image is too high or too low, you can reposition it. See
below.
■ To focus or zoom your image, see page 23.
■ If the image isn’t square, see page 23.
■ If a computer image displays incorrectly, see page 25.
■ If you need to fine-tune the image and/or sound, see page 97.
Adjusting the Height of Your Image
If the image is too low on the screen, you can use the front adjustable
foot to raise it.
1. Stand behind the projector. Press the foot release lever up and lift
the front of the projector.
2. Once the image is positioned where you want it, release the lever
to lock the foot in position.
3. If necessary, you can fine-tune the height or level of the image by
turning the projector’s adjustable rear feet.
Raising the projector causes the image to distort or “keystone,” but
you can correct the shape as described on page 23.
Projector rear foot