Filter
Top Products
Setting Up Network Projection 89
Removing the Wireless 802.11a/b/g
Module
Follow these steps to remove the module from your projector.
1. If you’re running NS Connection, click
Disconnect on the
control bar.
2. Check the access light to make sure it isn’t flashing.
3. Turn off the projector and unplug it.
4. Turn the projector over. Unscrew the cover plate, then remove it.
5. Pull the module off of the projector.
6. Replace the cover plate and secure it with the screw.
Click
Disconnect
caution
Never remove the module
while the indicator light is
green or when projecting
wirelessly. You may damage
the module or lose data.