Filter
Top Products
Fine-Tuning the Projector 51
sRGB:
For matching the color palette of standard sRGB
computer displays.
Blackboard: For projecting accurate colors on a green
chalkboard (adjusts the white point).
Customized: For manual color adjustment (see below).
■ Brightness
Lightens or darkens the overall image.
■ Contrast
Adjusts the difference between light and dark areas.
■ Color Saturation
Adjusts the color depth of the image.
■ Tint
Adjusts the balance of green to magenta in the image.
■ Sharpness
Adjusts the sharpness of the image.
■ Abs. Color Temp.
Sets a color temperature between 5000 and 10000 °K. (Not
available if
sRGB is selected as the Color Mode setting.)
■ Color Adjustment
Adjusts the color values. For Customized color mode, select
RGBCMY to adjust individual red, green, blue, cyan,
magenta, and yellow hue and saturation values. For other
color modes, RGB may be selected to adjust red, green, and
blue hue and saturation values. (Not available if
sRGB is
selected as the Color Mode setting.)
Six-Axis Color Adjustment
For special projection material, such as high-quality photographs or
artwork, you can adjust the hue and saturation for six different color
axes.
1. Follow the instructions on page 50 to open the Image menu and
select
Color Mode.
note
The Brightness setting
changes the opacity of the
projector’s LCD panels. You
can also change the lamp’s
brightness. Select
Brightness Control in the
Settings menu, then choose
High or Low (the default
setting is High).