Filter
Top Products
Publishing Discs 25
Batch Mode
This mode uses stacker 1 and 2 as the input stackers, and stacker 2 and 3 as the output
stackers.
You can create up to 100 CDs/DVDs at once without refilling and taking out discs while
publishing. Up to 1000 CDs/DVDs can be continuously published in a single job by refilling
discs and taking out published discs. To use this mode, you need to place stacker 3 into
the product.
& See “Batch Mode” on page 56.
Drive Settings
Drive to be used
Select Drive to Use from the following.
Use Both
Use both drive 1 and 2 to write data. Job will be efficiently processed by using 2 drives. If
trouble occurrs on either drive and it cannot write data, other drive will be used
automatically.
Use Drive 1 Only
Use only drive 1.
Use Drive 2 Only
Use only drive 2.
Number of write retries
Select 0 to 9 for the Number of write retries.
The Number of write retries is a setting to retry writing if a write error occurs.
Setting the Number of write retries will enable the job to continue without pausing if a write
error occurrs.