Filter
Top Products
Publishing Discs 26
Printer Settings
Printer name
Select Printer Name.
Note:
When changing the printer name, do not use Unicode characters. The device will not be recognized
correctly.
Failure error mark
If you check this check box, an error mark will be printed on any disc with a write error. This
is useful to identify the disc which encountered the write error.
The disc with the write error will be ejected to different stackers depending on the print
mode.
❏ Standard Mode: Ejected to stacker 4
❏ External Output Mode: Ejected to stacker 3 or 4
❏ Batch Mode: Ejected to stacker 2 or 3
Note:
The error mark will not be printed in the following cases.
❏ The job was canceled
❏ An incorrect disc type was found in the stacker
❏ Fatal error
❏ Not enough ink was left to print the error mark
Notice for CD/DVD Writing and Printing
❏ Store the stacker out of direct sunlight. A warped or damaged stacker may stop the
product from operating normally.
❏ Use only CDs/DVDs labeled as suitable for printing, for example “Printable on the label
surface” or “Printable with ink jet printers.”
❏ For more details on handling CDs/DVDs and for guidelines for writing data to
CDs/DVDs, refer to your CD/DVD documentation.