Filter
Top Products
If the list correctly describes your system, highlight
Y
and press
IEnter If a device is missing from this list, or if you want to
change the list, press
[Nl
or
+
and IEnter Then see “Modifying
the Device List” on page C-5.
Note
If your system uses the built-in VGA adapter or an EGA or
VGA card with a color monitor, your device list should
include item 5, Color graphics adapter and CRT. If your
system uses
the
built-in VGA adapter or an EGA or VGA
card with a monochrome monitor, your device list should
include item 4, Monochrome display adapter and CRT.
After you confirm the Device List, you
can
test only those
items. If you want to add a device later, return to the Operation
Menu and reselect System
diagnostics.
Note
After you install MS-DOS or another operating system, you
should always boot the computer from your hard disk or
from the system diskette to use it. When you finish running
System diagnostics, remove the Reference diskette from
drive A. If you do not have a hard disk, insert the system
diskette. Then reset your computer to make sure it performs
all the commands in the CONFIG.SYS and AUTOEXEC.BAT
files.
Performing System Diagnostics
C-3