Filter
Top Products
4.
After you highlight the appropriate display adapter type,
press IEnter The screen displays your new setting.
5. Highlight
*** SAVE SETTING *** and press
CEnter]
to
return to the main Setup menu.
Setting the Power-on Password
A power-on password is an optional feature that lets you
control who can access your system. If you do not want to set a
password, skip this section.
Once you set a power-on password, you must enter it at the
key prompt
(
h
)
every time you turn on or reset your
computer. If you do not enter it correctly, you cannot access
your system.
If you want to use your computer as a network server, you can
set your password to operate in network server mode. (See
“Using Your Computer as a Network Server” in Chapter 4 for
more information.)
Follow these steps to set a power-on password and turn on
network server mode (if necessary):
1.
At the main Setup menu, highlight
Password.
This
submenu appears:
Power-on password
Network server mode OFF
2.
Press IEnter The cursor block moves to
Power-on
password.
3.
Press IEnter The cursor block moves to an empty box.
Running the Setup Program 2-9