Filter
Top Products
24 Using Epson MovieMate with Other Equipment
After you connect your equipment to Epson MovieMate, follow these steps to begin:
1. Connect the power cords and plug in all the equipment.
2. Open the lens cover and press the button on Epson MovieMate or on the remote
control.
3. Press the button on Epson MovieMate or on the remote control.
4. When you see the menu, use the down-arrow or up-arrow button to select the correct
source, then press .
■ If you used the component video connection, select Component.
■ Otherwise, select Video.
5. Turn on the power to the connected video equipment, then start playing the video or
game.
6. Normally, Epson MovieMate selects the correct aspect ratio automatically. If you need to
change the aspect, press the button on the remote control and select
Normal, Full,
or
Zoom (if available for the video source you’re using). (Make sure the toggle switch on
the remote control is set to the
Func.- position.)