Filter
Top Products
26 Using Epson MovieMate with Other Equipment
Playing Epson MovieMate Audio Through an
External Audio System
You can connect Epson MovieMate to an amplifier, a 5.1 Stereo Surround Sound System, or
a digital audio recorder. To output sound from Epson MovieMate, the external equipment
needs to have a digital coaxial (S/PDIF) audio input port.
You will also need a digital coaxial cable, which may be provided with your external
equipment, or may be purchased from an electronics store.
1. Make sure the equipment is turned off, then connect the cable as shown:
2. Turn on your audio equipment and play your movie, music, or other presentation with
sound from Epson MovieMate.
3. You may need to change the
Digital Output setting in the Audio Setup Page. Select
Stream if you are connecting a DTS/Dolby Digital Decoder or PCM if you are
connecting to equipment that is only compliant with linear PCM. For more information,
see page 40.
You can use any of Epson MovieMate’s audio controls, as described on pages 17 and 20.
Digital Coaxial
Audio-Out
Digital coaxial cable