Filter
Top Products
Sawgrass Technologies, Inc. ChromaBlast
™
Getting Started Guide for the EPSON Stylus C120/c110
14
11. The plastic arm should be
aligned so that the edge of the
adhesive Velcro is situated at the
top right hand corner of the ink
cartridge bay. Press the plastic
arm firmly to set the adhesive
Velcro in place.
12. Press printer ink button
(second button on the left side
of the printer). The printer will
start to prime and reset itself.
The ink cartridge carriage will
move in position.
13. Congratulations. You have installed your C120/C110 Quick
Connect bulk ink system. You are now ready to install the
ChromaBlast C120/C110 driver software.
9. Install the plastic support
arm. First remove the adhesive
backing on the back of the
plastic arm.
10. The plastic tubing comes
pre-attached to the plastic arm
with two adhesive bands.
Position the plastic arm on the
far right side of the printer.