Filter
Top Products
Sawgrass Technologies, Inc. ChromaBlast
™
Getting Started Guide for the EPSON Stylus C120/c110
20
9. Place the new ink
cartridge into the cartridge
holder and push it down
until it clicks into place.
10. Once the ChromaBlast
cartridges are in place,
close the ink cartridge cover
and press it until it clicks
into place.
11. Close the printer cover.
12. Press the ink button for one second. The printer begins charging ink
and the power light starts flashing. This takes about 1 ½ minutes. When
it’s finished, the power light stops flashing and remains on, and the ink
light goes out.
Never turn off the printer while the
power light is flashing or you’ll waste
ink.
If the ink light stays on (not flashing),
the ink cartridge may not be installed
correctly. Press the ink button again
and reinstall the ink cartridge until it
clicks into place.