Filter
Top Products
Sawgrass Technologies, Inc. ChromaBlast
™
Getting Started Guide for the EPSON Stylus C120/c110
22
8. Remove the yellow tape from the
bottom of the ink cartridge.
9. Place the new ink cartridge
into the cartridge holder and
push it down until it clicks into
place.
10. Once you replace any other
cartridges that need replacing,
close the ink cartridge cover and
press it until it clicks into place.
11. Close the printer cover.
12. Press the ink button. The printer begins printer begins charging ink
and the power light starts flashing. This takes about 1 ½ minutes. When
it’s finished, the power light stops flashing and remains on, and the ink
light goes out.
Never turn off the printer while the
power light is flashing or you’ll waste
ink.
If the ink light stays on (not flashing),
the ink cartridge may not be installed
correctly. Press the ink button again
and reinstall the ink cartridge until it
clicks into place.