Filter
Top Products
Configuring the printer
3-6
3.4 Explanation of Individual Menu Items
Main Functions
The following main functions are available:
S MACRO SELECT
To select one of the four macros which can be used for quickly changing the
printer settings for different applications. For example: Application A needs
fanfold paper cut into single sheets with a top margin of one, application B
processes fanfold paper in a batch with a top margin of six. Simply by
pressing MACRO SELECT the macro containing the information for the
specific application requirements can be activated.
S CHANGE MACRO
In this part it is possible to create a macro for specific application needs (For
detail information see chapter Function CHANGE MACRO beginning on the
next page).
Note: Most parameters can be set via the control panel or via escape sequences
from the host computer. The changes via escape sequences are visible in
the column CURRENT SETTINGS
S INSTALLATION
In the first sub-function named INTERFACE you can manipulate parameters
to enable communication with the host.
In the second sub-function labelled ADJUSTMENT you can optimize your
printouts. (Detail information you will find in the Sub-Function INTERFACE /
ADJUSTMENT)
S SAVE
Any desired changes to the default settings can be saved here. After power
on the new settings are activated.
While this function is operating the display flashes SAVING NOW.