Filter
Top Products
Configuring the printer
3-12
S The bottom margin indicates the last print line. Going beyond this margin
automatically initiates a form feed. The bottom margin is always set in steps
of / ".
1
6
The bottom margin can be set to a maximum of / ".
8
6
The above specifications are influenced by the settings in "Vertical Position"
(see section "V.POS" in this chapter).
S Perforation Skip
S If PERF. SKIP is set to YES the printer starts to print after specified top
margin and stops printing before the bottom Margin.
S If PERF. SKIP is set to NO the printer ignored the top and bottom margin
and prints from the very first line to the very last. That means that on a
standard 11" paper 66 lines are available for printing.
S Paper Source
The printer offers three input possibilities:
S TRACTOR (fanfold paper)
S Manual (for printer CI - 4040 optional)
S ASF cassettes (optional only for printer CI - 4050), they can be
accessed either individually or pooled in a specified sequence. Any
combination or cassettes can be selected (for detail the chapter 7 ASF
Cassettes).
A corrective factor for the vertical positioning of the paper can be applied to
each paper source and the Run-In-Sensor (see section VERT.POS.ADJ.).
Note: Please refer to chapter 8, Technical Data, for detailed media
specifications.