Filter
Top Products
100
■ Place the Stylus CX5400 on a flat, stable surface that extends beyond its base in all
directions. It will not operate properly if it is tilted or at an angle. Leave enough
space in front of the Stylus CX5400 (at least 9 inches) so it doesn’t tip forward
and fall off of the work surface.
■ Turn off and unplug the Stylus CX5400 before cleaning. Clean with a damp
cloth only. Do not spill liquid on it.
■ Always turn the Stylus CX5400 off using the On button. Don’t turn off
the power using a switch on a power strip or unplug the Stylus CX5400 until the
On light is off.
■ Do not block or cover openings in the Stylus CX5400 case or insert objects
through the slots.
■ Except as specifically explained in your documentation, do not attempt to service
the Stylus CX5400 yourself.
■ Unplug the Stylus CX5400 and refer servicing to qualified service personnel
under the following conditions: if the power cord or plug is damaged; if liquid has
entered the product; if the product has been dropped or the case damaged; if the
product does not operate normally or exhibits a distinct change in performance.
Adjust only those controls that are covered by the operating instructions.
■ Before transporting the Stylus CX5400, make sure the print head is capped in the
far right position, the ink cartridges are in place, and the scanner is secured by the
transportation lock.
■ This product includes a lamp component that contains mercury. Please consult
your state and local regulations regarding disposal or recycling. Do not put in the
trash.
Ink Cartridge Safety Instructions
■ Leave the ink cartridges installed. Removing the cartridges can dehydrate the print
head and may prevent the EPSON Stylus CX5200 from printing.
■ Keep ink cartridges out of the reach of children and do not drink the ink.
■ Be careful when you handle used ink cartridges; there may be ink remaining
around the ink supply port. If ink gets on your skin, wash it off with soap and
water. If it gets in your eyes, flush them immediately with water.